「一提到冷庫，你是不是只關心『製冷夠不夠冷』？但你知道嗎？冷庫的『健康』遠比溫度更重要！如果門封條老化漏冷、蒸發器結滿冰霜、冷凝器積灰堵塞……不僅會讓電費飆升30%，還可能引發設備故障、貨物損耗，甚至安全隱患！

 When it comes to cold storage, is your first thought: “Is it cold enough?” But here’s the thing—a healthy cold room is more important than just low temperatures!If door seals are worn out, evaporators are buried in frost, or condensers are clogged with dust... you're not just losing cold air—you’re burning up to 30% more electricity, risking equipment failures, product loss, and even safety hazards!

廣東先進製冷針對冷庫保養，有以下建議——定期除霜、清潔管道、校準感測器，看似『麻煩』的操作，卻能增加冷庫的使用壽命，每年省下一台冷庫的維修費！

At Guangdong ARTECO, we believe cold room maintenance should be part of every boss’s money-saving playbook. Regular defrosting, pipe cleaning, sensor calibration—these may sound like chores, but they extend equipment life and save you a cold room’s worth of repair costs every year!

日常維護中的細節
<Daily Details That Matter
<
<01
<冷庫門密封性維護要點
<Cold Storage Door Seal Maintenance Key Points
規範操作流程
冷庫門開啟後需儘快完成貨物存取操作，避免長時間敞開導致庫內溫度波動。
Follow proper opening proceduresAlways open and close the cold room door quickly. Leaving it open causes major temperature swings.
定期巡檢密封裝置
每月對門封條進行全面檢查，重點觀察橡膠條是否出現硬化、開裂或變形，需立即更換新件。
Monthly Seal Inspection
Check rubber strips for cracks, hardening, or warping. Replace them at the first sign of damage.
優化密封輔助結構
在門體內側加裝耐磨橡膠密封條或毛刷組件，可有效填補門縫間隙。定期清理附著灰塵以維持彈性性能。
Seal Upgrades
Install extra rubber strips or brushes on the door’s inner frame to block gaps. Clean them regularly to keep them elastic.

別讓冰霜成為「隱形殺手」
Defrosting: Frost = Hidden Power Thief
風冷冷庫：霜層超5mm必須除霜！否則製冷效率暴跌30%！
<排水管清潔：除霜後及時清理融水，